What Is the Fastest Way to Lower Alkalinity in a Pool?
pH is a measure of acidity or alkalinity with which the proper water chemistry can be managed throughout the acidic or alkaline scale. Although a robot pool cleaner can remove dirt and debris, high alkalinity can result in cloudy water, scaling, and ineffectiveness of chlorine. If you must treat high alkalinity fast, use these steps to bring your pool back to balance.
Why Is Alkalinity Too High a Problem?
The total alkalinity (TA) is 80-120 ppm. If it is too far up, you might have:
- Calcium deposits cause cloudy water.
- It makes the water more difficult to maintain due to unstable pH levels.
- Diminished chlorine effectiveness, which causes bacteria growth.
- Scaling of pool surfaces and equipment
- The fastest way to reduce alkalinity
Muriatic Acid or Sodium Bisulfate
- The best way to lower alkalinity fast is to add either muriatic acid or sodium bisulfate:
- We need to stop running the pool pump so we do not mix the pool.
- Add the acid: Use approximately 1 quart of muriatic acid for every 10,000 gallons to lower TA by 10 ppm.
- And pour slowly near a return jet to provide even distribution.
- Wait 30 minutes, reconnect the pump, and let the acid run for at least 6 hours.
Aerate the Pool Water
- Aeration brings pH back up after acid addition without further effect on alkalinity. Methods include:
- Using a vacuum or skimmer to help with circulation
- Using a wall climbing pool cleaner to circulate some water
- Switching on water features such as fountains or jets
Vacuum and Clean the Pool
If high alkalinity has created calcium scale or flat-out cloudiness, utilize a pool suction robot or a swimming pool robot cleaner — any standard pool-cleaning or cleaning device, to suck up dirt and calcareous deposits. Pool booster pumps can aid in distributing the water evenly while cleaning the pool.
Keeping Your Pool Balanced with Beatbot Pool Robots
You can also look for a pool cleaning robot like Beatbot iSkim Ultra, which removes organic matter, helping reduce the need for harsh chemicals. Pool surface cleaning systems are also great models, including Beatbot AquaSense 2 Pro and Beatbot AquaSense 2, which can sweep pool surfaces and prevent scale buildup due to high alkalinity.
Conclusion
To lower pool alkalinity , you must use muriatic acid, aeration, and proper circulation. A robot pool cleaner, skimmer, and pool vacuum are also recommended to keep a balanced water level. These steps will help you restore your pool’s alkalinity in no time so everyone can enjoy that sparkling water again.
